The Problem-Solution Series: Part 21

By

Orange Peel Predicament


Problem:
The film displays too much orange peel (has a rough appearance). 

Origin/Cause:
The coatings could vary in their amount of orange peel properties. 


Solution:
Your best bet is to call or email TCI for information and recommendations. 

Second Origin:
The film thickness may be too thick or too thin. 

Solution:
Increase or decrease the film’s thickness according to information.

For additional information on powder coatings, visit our website at tcipowder.com. Feel free to contact us today to have someone from our experienced team answer your powder coating questions or to see how we can help you with your powder coating needs.

Comments

  1. AnonymousNovember 27, 2016 at 10:51 AM



    Subject the material order sputtering preparation of multilayer films, sputtered oxides and other insulating materials and alloys almost no decomposition and fractionation.
    For example, the use of silicon, oxygen and argon with the pass into the vacuum chamber as the sputtering target can be obtained after sputtering a Si02 insulating film; the use of titanium as a sputtering target, nitrogen and argon with Walter vacuum chamber, after splash.
    We can see more: film thickness

    ReplyDelete

Post a Comment

Popular posts from this blog

Benefits of Fast Cure Products

By
Image
TCI's formulation lab uses innovative technology to enhance the economic and environmental benefits of our offerings. One way we do that is by offering fast cure technology. The benefits of these cures include:  1) Energy Savings: Increased line speeds = reduced manufacturing hours 2) Maximized Output Profit: By coating more parts in the same amount of time, the manufacturing costs  is lowered improving the profit margin per part 3) Eliminate bottlenecks associated with cure time/temperature restraints of the power application/cure process 4) Reduced carbon footprint in combination with reduced operating hours The faster you can cure, the less you need to run the cure oven, and the greener your powder coating process will be.  Discover our stock Fast Cure (FC) product offerings on our color card here:  https://tcipowder.com/products/color-cards/stock-color-card/
Read more

Automotive and Rim Powder Coatings

By
Image
Do your automotive parts or rims need the durability and protection of a powder coating? TCI Powder Coatings offers a wide variety of coating options specially designed to meet your needs. Powder coating is less expensive and more durable than other automotive finishes, and powder coated rims will resist chipping, scratches and road salts much better than any other type of polish. At TCI we know that it is extremely important that cars are protected in any setting, and it is necessary to coat them to the best standards possible. Contact a TCI representative today to speak about coatings for your shop’s needs. To find out more about these coatings, visit the TCI website  here .
Read more

Fabtech 2019

By
Image
Fabtech is always an exciting and electrifying show, and this year in Chicago was no different. The event attendees totaled over 48,000 from 95 different countries. TCI utilized the same booth we did last year, a 20’ x 20’ space with graphics highlighting our values: innovation, service and performance, and also our 7 core markets. This year we brought TCI product literature such as stock color cards, case studies and RAL Decks. We also used this opportunity to launch our new high-performance FenceCoat Gen II platform and highlighted it with various fence parts coated in popular architectural colors. Other powder coated parts we displayed included domes and speed shapes. The bright colors and variety of textures on these pieces brought much attention and people were intrigued by all the options that powder coatings can offer. Our favorite part of the show was getting the opportunity to chat with attendees and the other exhibitors involved in the Finishing Market. I...
Read more