Low Flexibility and Impact Resistance
You
notice that the coating has been showing low flexibility and little impact
resistance.
Cause/Origin:
It is possible that a change has been made to the substrate, but nothing has changed about the process.
It is possible that a change has been made to the substrate, but nothing has changed about the process.
Solution:
Contact your suppliers to ensure no changes to the substrate have been made.
Second Origin:
The film may be too thick.
Solution:
Reduce the film thickness to the TCI specs.
Reduce the film thickness to the TCI specs.
Third Origin:
Under-cured films have low flexibility.
Under-cured films have low flexibility.
Solution:
Modify the cure conditions by increasing the temperature and/or dwell.
Modify the cure conditions by increasing the temperature and/or dwell.
For additional information on powder coatings, visit our website at tcipowder.com. Feel free to contact
us today to have someone from our
experienced team answer your powder coating questions or to see how we can help
you with your powder coating needs.
No comments:
Post a Comment