The Problem-Solution Series: Part 16
Cured Film with Poor Adhesion
It's been cured, so why isn't it adhering?
Problem: After
curing the piece, the film is not adhering correctly.
Origin/Cause: Insufficient cleaning and/or an unsatisfactory pretreatment process are limiting adherence to the part.
Solution: Assess and correct the conditions and chemicals of the cleaning station as well as the rinse and pre-treatment stages.
Origin/Cause: Insufficient cleaning and/or an unsatisfactory pretreatment process are limiting adherence to the part.
Solution: Assess and correct the conditions and chemicals of the cleaning station as well as the rinse and pre-treatment stages.

Comments
Post a Comment